• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 22 subscribers
  • Views 2283 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can i backup from target?

Jason Lee

Hi. In old days, with AVR, i can read binary as HEX file using AVR studio.

It was very useful for me.

Anyway, I'm curious. Is there any method do that with keil?

Is there any menu or command?

My target is M0 (nrf51). and programmer is CMSIS-DAP (FRDM-KL25Z)

I wanna make HEX file from code memory on target.

I'm not saying about flash load to target.

Thanks for reading. Have a nice day.

Parents
  • 0 in reply to D Gordon73

    I believe you are talking about the save command in uVision.

    Goto the command windows in uVision.

    Enter

    save c:\temp.hex 0x00000000, 0x00000200

    this will save the first 512 bytes as a hex file (actually 513 in the above case)

    The parameters are filename, start address and end address

Reply
  • 0 in reply to D Gordon73

    I believe you are talking about the save command in uVision.

    Goto the command windows in uVision.

    Enter

    save c:\temp.hex 0x00000000, 0x00000200

    this will save the first 512 bytes as a hex file (actually 513 in the above case)

    The parameters are filename, start address and end address

Children
No data