Is there anything such as Systemview "in the pipe"? It seems it is really useful, but it can only be used with J-Link in "streaming mode". See www.segger.com/.../ or mcuoneclipse.com/.../
OK, I think I found the solution to use Segger's Systemview with MDK. Actually multiple solutions.
One is to simply safe the buffer. This also works with ULINK. Disadvantage: Single shot mode only, limit by amount of available RAM. Still quite useful.
Or: Use J-Link in parallel to MDK Or: Use J-Link on a release build (which will give you more accurate timing information anyhow, as one really wants to know what the timing of a release build is, not a debug build), so run Systemview without MDK
Hi Dirk. You might want to have a look at our Tracealyzer tools, see http://www.percepio.com.