We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
i'm nagendra murthy, i'm developing code for STM32F427VITboard for blinking the led using keil. i'm facing the problem in solving this error *** error 65: access violation at 0x40023800 : no 'read' permission. i have connected the LED to port B pin no 14 and 15. program is running without errora and warning. but when i debug it. it is showing error mentioned above.. please help me..
I got past this problem for the debugger following the advice at http://www.keil.com/support/docs/814.htm - in my case all register read write access (addresses starting 0x4...) for my TI TM4C123GHXL was blocked so I created a debug project .ini file
Project->Options for Target->Debug then added an Initialization file using the ... button (my.ini) create the file and click OK then in the my.ini file I added
MAP 0x40000000, 0x47FFFFFF READ WRITE // allow R/W access to IO space
save the file and restart the debugger. This will gave me permission to read or modify any of the SYSCTL, GPIO, etc. registers.