Hi friends I want to setting up a WSO100 Module witch work on NMEA2000 network. I use a LPC1768 for communicate with WSO100... Does anyone have information on this network? Any answer will be appreciated.
Thank you Westonsupermare Pier for your reply OK, according to NMEA2000 documents, this network is similar to CAN Bus so I do this steps: 1) Set CAN baud rate to 250 kbit/s 2) Set CAN_rx_object (1, 1, 0x1FDFF, DATA_TYPE | EXTENDED_TYPE) witch 0x1FD02 is PGN number for wind data on WSO100 As I read in WSO100 user manual, PGN #0x1FD02 is periodical data and repeat every 10sec. but with this setting on CAN controller I do not receive any data on can bus... If i'm wrong, please tell me how should I set CAN setting. It's so necessary please help me Best Regards