We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi all,
I'm quite new at using uVision. Currently I'm using C8051F120-TB board. I want to make a Multiply and Accumulate project. My problem is when I build my project, it doesn't recognize MAC0_PAGE. Do I need to do something before caling MAC0_PAGE?
Anyway, here's my program
#include <c8051f120.h> // try 9*14 + 12*5
void try (void); void INIT (void);
void main (void) { WDTCN = 0xDE; WDTCN = 0xAD;
INIT(); try();
while(1); }
void INIT (void) { char SFRPAGE_SAVE = SFRPAGE;
SFRPAGE = MAC0_PAGE;
MAC0CF = 0x00;
SFRPAGE = SFRPAGE_SAVE; }
void try (void) { char SFRPAGE_SAVE = SFRPAGE; SFRPAGE = MAC0_PAGE;
MAC0AH = 0x00; MAC0AL = 0x09; MAC0BH = 0x00; MAC0BL = 0x0E;
MAC0AH = 0x00; MAC0AL = 0x0C; MAC0BH = 0x00; MAC0BL = 0x05;
Thanks in advance
Adi
Do I need to put another libary from SiLabs? you clearly need another. As a general rule, you are better off to get device specific files from the manufacturere than Keil