Hi everyone, I am using 10.1 inch (1024*600 pixel) TFT with LPC1788.i am new to 10.1 inch TFT display.now i am trying to develop a driver for 10" TFT lcd and am using 256MB SDRAM for image buffer.but i am not getting the correct value for
1) horizontal&vertical front porch,back porch value 2)horizontal & vertical pulse width value. 3)pannel clock value
but i got some sample 10.1" TFT values from google.but its not giving expected result.the issue is
1)the TFT lcd back light is flickering. 2)if i am giving red color its displaying yellow .
can any one guide me to solve the issue?thank you.
hi friend. thank you for your response.i studied the documentation.sorry The model no is WY101ML285HS18A .its a 10.1" TFT display.1024*600 pixel resolution.i searched a lot if u find any information tell me.
Did you buy an LCD module without first checking the data sheet. At the very least, you should have determined the availability of data sheets.
And by no means of the imagination could it be regarded as a Keil related question.
hi, i didn't bought the LCD.already its purchased and now i am trying to use this.i got data sheet for the particular LCD also.but its not heaving any timing characteristics.with out timing characteristics i cant give value for horizontal /vertical front porch and back porch .that's why i am asking is there any one interfaced 10.1" TFT LCD with LPC1788 or any micro controller?if u did already give me some idea.i know different LCD manufacture value wont work.just try only.
You find it strange if I recommend that people first look at datasheets before deciding what to buy?
Post a link to the manual you are working with. Googling the part# isn't helping.
Post a link to where you bought it.
Dear Friend., the link for the TFT lcd manual is: www.lpcware.com/.../10.1】RG101ML308HS18A(HSD10.1)-without any logo_1.pdf
i am going to use HV mode.so i need the value for hsync ,vsync and pulse width value. how to configure this TFT lcd can you help me?
www.subliminalrich.com/.../500 www.subliminalrich.com/.../519 www.subliminalrich.com/.../530
hello friends how to use TFT lcd in DE mode by using the following value? Vertical Display Time Vertical Blanking Time Horizontal Display Time Horizontal Blanking Time can any one can hep me?