• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 5174 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC2148 ASSEMBLY PROGRAMMING

SHUBHAM GARG

I have done programming of lpc2148 in c but now i want to program lpc2148 in assembly language.So, i want to know how to use all the register of lpc2148 for eg, PINSEL , IODIR etc..

I would be thankful if some one provide blinking of led code in assembly language for lpc2148, so that i can start programming.

I have written code for some dsp functions for ARM but not knowing how to run them on lpc2148.

please help !!!

Parents
  • 0

    Suggest you get some books, and search for some examples. The internet is awash with assorted examples and code fragments you could use, or learn from. The manuals for your part should include register and bit details.

    You're basically try to load and store constants

    C:\Keil\ARM\Boards\Keil\MCB2140\RTX_Blinky\Startup.s

    ..
; External Memory Pins definitions
PINSEL2         EQU     0xE002C014      ; PINSEL2 Address
PINSEL2_Val     EQU     0x0E6149E4      ; CS0..3, OE, WE, BLS0..3,
                                        ; D0..31, A2..23, JTAG Pins
..
; Setup External Memory Pins
                IF      :DEF:EXTERNAL_MODE
                LDR     R0, =PINSEL2
                LDR     R1, =PINSEL2_Val
                STR     R1, [R0]
                ENDIF

Reply
  • 0

    Suggest you get some books, and search for some examples. The internet is awash with assorted examples and code fragments you could use, or learn from. The manuals for your part should include register and bit details.

    You're basically try to load and store constants

    C:\Keil\ARM\Boards\Keil\MCB2140\RTX_Blinky\Startup.s

    ..
; External Memory Pins definitions
PINSEL2         EQU     0xE002C014      ; PINSEL2 Address
PINSEL2_Val     EQU     0x0E6149E4      ; CS0..3, OE, WE, BLS0..3,
                                        ; D0..31, A2..23, JTAG Pins
..
; Setup External Memory Pins
                IF      :DEF:EXTERNAL_MODE
                LDR     R0, =PINSEL2
                LDR     R1, =PINSEL2_Val
                STR     R1, [R0]
                ENDIF

Children
  • 0 in reply to Westonsupermare Pier

    Thank you so so much for your reply.

    Sir, main problem is everywhere the code are written in c.

    I have studied two books
    1.ARM SYSTEM DEVELOPERS GUIDE
    2.ARM ON CHIP ARCHITECTURE
    but they are explaining general assembly programming but i want application based programming like SPI,ADC,USART for lpc2148.

    I just want to know how to start writing assembly program for lpc2148 else everything i can adjust like addresses of different register from the manual of lpc2148

    can suggest any other book for these purposes