• State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 22 subscribers
  • Views 2315 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to connect & debug AT89C51RE2 with Ulink2 ?

Tomas Kuckenburg

Hi,

Could someone help me with that question pls ?
Can I use an ulink2 for that or do I need an ATOCD51 and if, where to purchase that device ?

Thx, Tom.

Parents
  • 0

    Hey guys,

    Thx btw for the replies - but please read the question, understand it and post a reply only if you really got it.
    The AT89C51RE2 has two dedicated OCD lines (RxD, TxD). This has NOTHING to do with an ICE or serial monitor debugging, sorry guys.
    There is a dedicated device called ATOCD51 debug adapter to connect via USB to that lines and afaik the ulink/ulink2 hat a plug for 51-2 pins OCDS internally as well.
    So, my question is: Does the ulink2 support this derivate as well or do I need the dedicated ATOCD51 adapter. It comes in the same housing, just different labeling on it...

    thx and sorry if I could not make my question totally clear in the first run...

    tom ;o).

Reply
  • 0

    Hey guys,

    Thx btw for the replies - but please read the question, understand it and post a reply only if you really got it.
    The AT89C51RE2 has two dedicated OCD lines (RxD, TxD). This has NOTHING to do with an ICE or serial monitor debugging, sorry guys.
    There is a dedicated device called ATOCD51 debug adapter to connect via USB to that lines and afaik the ulink/ulink2 hat a plug for 51-2 pins OCDS internally as well.
    So, my question is: Does the ulink2 support this derivate as well or do I need the dedicated ATOCD51 adapter. It comes in the same housing, just different labeling on it...

    thx and sorry if I could not make my question totally clear in the first run...

    tom ;o).

Children