COMMAND LINE

I THINK YOU ARE TRYING TO DO TOO MUCH COMPLICATED STUFF BEFORE YOU KNOW THE BASIC.

I SUGGEST YOU TRY SOMETHING LIKE THIS FIRST www.computerbasicsguide.com/

I THINK YOU ARE TRYING TO DO TOO MUCH COMPLICATED STUFF BEFORE YOU KNOW THE BASIC.

I SUGGEST YOU TRY SOMETHING LIKE THIS FIRST www.computerbasicsguide.com/

CAN SOMEONE REPLY TO THIS QUESTION. HOW TO DO IT.
I AM BEGINNER WITH 89C51.
KINDLY DO NOT REPLY OF YOU DO NOT WANT TO ANSWER MR. ANNE-DREW.ITS NOT LIKE IT WILL GAIN POPULARITY TO YOU

BUT WHAT YOU ARE ASKING HAS NOTHING TO DO WITH 89C51 OR EVEN KEIL - IT IS BASIC PC OPERATING SKILLS!!

Go to your Keil\C51_905\C51\Hlp\ folder, and locate the GS51.chm file;
it is the Keil Getting Started User's Guide for 8051 Microcontrollers.

You will also need to study the other tool Manuals:

http://www.keil.com/support/man_c51.htm

In particular, take time to work through the examples in the uVision manual:

http://www.keil.com/support/man/docs/uv4/uv4_examples.htm

Note that tool manuals are not beginner's guides - they assume that the user is already familiar with at least the basics of PC operation, microcontrollers, programming, embedded development, etc.

For basic study, see:

http://www.keil.com/books/

http://www.8052.com//tutorial

www.8052.com/.../187976

People are specifically ignoring you because you have decided to SHOUT here. Fix your keyboard - a new PC keyboard where the caps-lock isn't stuck doesn't cost much.

HERE IS A VERY USEFUL SITE FOR YOU TO VISIT BEFORE DOING ANYTHING ELSE

www.wikihow.com/Turn-Off-Caps-Lock

Its for LM3S8962.
How to build with C99?

So why did you say 89C51, then??!

All the ARM tool manuals are here:

http://www.keil.com/support/man_arm.htm

You should start, as the name suggests, with the Primer:

http://www.keil.com/support/man/docs/gsac/

Again, work through the example programs in the uVision manual:

http://www.keil.com/support/man/docs/uv4/uv4_examples.htm

Books to help you:

http://www.keil.com/books/

Earlier I used CCS for LM3S8962.
But if now shifted to Keil.
So I tried 89C51 with Keil for starter, but at last have to keil for LM

Read this www.cprogramming.com/.../lesson14.html. It says "Command-line arguments are given after the name of a program in command-line operating systems like DOS or Linux, "

But how/where is place for enter the parameters.

But how/where is place for enter the parameters.

At the command line!

Open up a command line console; e.g., select "run ...", type "cmd" and press "ok".

Then type in the command line you require.

Have to never used anything else except a GUI?

That's talking about passing arguments to your program at run time from an OS such as MS-DOS or UNIX/Linux.

Do you have an OS such as MS-DOS or UNIX/Linux on your LM3S8962...?

To pass controls to the tools at build time - see the Documentation for the tools!

Have you studied the specific documentation for the Keil tools yet?

Note that your link didn't work because you put a full-stop ("period") at the end of it. Always leave clear whitespace around URLs - otherwise the "linkification" won't work.
The correct link is:

www.cprogramming.com/.../lesson14.html

Aparently not! (CCS is a GUI/IDE).

But there is no need to!

As already noted, build-time controls for the tools can be specified via the GUI (uVision or CCS or whatever) - the OP needs to Please read the manual for details...

But there is no need to!

What's the world coming to?

IMHO, knowing the command line is a fundamental.

I can even get to a command line on my Android phone.

Agreed - and this thread is a perfect example!