We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello
I'm working on a CDC USB communication (Atmel ARM9 processor). On the PC side, I have a virtual comm port. When my device runs without JTAG/ emulation (UV4), it works fine, but when I try to debug using JTAG / UV4, all comm ports are declared to be used by another software. A test communication with a software like hyperterminal is then impossible.
Does the JTAG Ulink2 or µvision / debugger reserve virtual comm ports ? How can I debug AND test my dialog throughj USB/comm port on the same PC ?
Thanks for your help Denis
Is the Flash Download also set to ULINK2?
Flash Download Configuration www.keil.com/.../ulink2_su_flashdownloadcfg.htm
> moreover, the USB enum only works on one desktop computer, but the device is not recognized on two other laptop computers, all under Win XP.
Which example are you based on? Atmel's?
Tsuneo
>>Is the Flash Download also set to ULINK2?
Yes, the target is flashed through the JTAG link, and this is OK.
>>Which example are you based on? Atmel's? I started from the Atmel CDC serial example usb-device-cdc-serial-project-at91sam9xe-ek-keil I just want a serial link between my device and a PC. the inf file is based on the 6119.inf template, with only a string modified for the name of the connection.
when the connection is OK, the device is recognized, its names is displayed, and sometimes a test using a terminal software like hyperterminal makes it possible to send and receive some strings. But most of the time, the com port is said used, and the test is impossible.
Denis