This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

serial communication

serial communication does not works between two AT89c512 PI24 microcontroller without max232 weather there is possibilities for communication or we must use max232?

Parents
  • I do not know if micro (u) can, but ....

    well, who knows. It could be your PIG code or your '51 code or your connections. AH, just remember - becuse of identical names, most routing software tend to connect Tx to Tx instead if Tx to Rx, YES, I got caught on that one once :(.

    "it does not work, help" is NOT a substitute for debugging although it seems many believe so.

    Erik

Reply
  • I do not know if micro (u) can, but ....

    well, who knows. It could be your PIG code or your '51 code or your connections. AH, just remember - becuse of identical names, most routing software tend to connect Tx to Tx instead if Tx to Rx, YES, I got caught on that one once :(.

    "it does not work, help" is NOT a substitute for debugging although it seems many believe so.

    Erik

Children
No data