This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I am doing project on rfreader, door locking system

RFreader reads the input fron the ID-card and sends it to microcontroller. mcu compares the same no with the available no's. If no. is matched then generates output pin high. Plz help in me in implementing the code in c.Total there are 250 different IDs available.

Parents

0 pradeep kumar over 13 years ago in reply to John Linq

#include<reg51.h>
void boud_rate()
{
        SCON = 0x50;
        TMOD = 0x20;                /* timer 1, mode 2, 8-bit reload */
        TH1  = 0xFD;                /* reload value for 2400 baud */
        TR1  = 1;
        TI   = 1;
}
char serial_receive()
{
    char chr;        /* variable to hold the new character */
        while (RI != 1) {;}
        chr = SBUF;
        RI = 0;
        return(chr);
}

void main(void)
{

        boud_rate();
  unsigned char rx_data;

  for(;;)
  {
    rx_data = serial_receive();

    switch(rx_data)
    {
//      case '1': open_door();
          case 0067892341 : open_door();
        break;
//      case '9': open_door();
       case 0045780034 : open_door();
        break;

      default: dont_open();
    }

    proper_delay();
  }
}

errors

'rx_data':undefined identifier
 illigal octal digit

please tell me how to overcum these errors

Reply

0 pradeep kumar over 13 years ago in reply to John Linq

#include<reg51.h>
void boud_rate()
{
        SCON = 0x50;
        TMOD = 0x20;                /* timer 1, mode 2, 8-bit reload */
        TH1  = 0xFD;                /* reload value for 2400 baud */
        TR1  = 1;
        TI   = 1;
}
char serial_receive()
{
    char chr;        /* variable to hold the new character */
        while (RI != 1) {;}
        chr = SBUF;
        RI = 0;
        return(chr);
}

void main(void)
{

        boud_rate();
  unsigned char rx_data;

  for(;;)
  {
    rx_data = serial_receive();

    switch(rx_data)
    {
//      case '1': open_door();
          case 0067892341 : open_door();
        break;
//      case '9': open_door();
       case 0045780034 : open_door();
        break;

      default: dont_open();
    }

    proper_delay();
  }
}

errors

'rx_data':undefined identifier
 illigal octal digit

please tell me how to overcum these errors

Children

No data