RFreader reads the input fron the ID-card and sends it to microcontroller. mcu compares the same no with the available no's. If no. is matched then generates output pin high. Plz help in me in implementing the code in c.Total there are 250 different IDs available.
I have already given you a clue (aka "hint")
#include<reg51.h> void baud_rate() { SCON = 0x50; TMOD = 0x20; /* timer 1, mode 2, 8-bit reload */ TH1 = 0xFD; /* reload value for 2400 baud */ TR1 = 1; TI = 1; } char serial_receive() { char chr; /* variable to hold the new character */ while (RI != 1) {;} chr = SBUF; RI = 0; return(chr); } void main(void) { #include<reg51.h> void boud_rate() { SCON = 0x50; TMOD = 0x20; /* timer 1, mode 2, 8-bit reload */ TH1 = 0xFD; /* reload value for 2400 baud */ TR1 = 1; TI = 1; } char serial_receive() { char chr; /* variable to hold the new character */ while (RI != 1) {;} chr = SBUF; RI = 0; return(chr); } void main(void) { baud_rate(); unsigned char rx_data; for(;;) { rx_data = serial_receive(); switch(rx_data) { case 0067892341 : open_door(); break; case 0045780034 : open_door(); break; default: dont_open(); } proper_delay(); } } errors rx_data:undefined identifier illigal octal digit