• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 22 subscribers
  • Views 2057 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MATLAB INTERFACE LPC2148

srihari chekuri

hello sir,

I am student doing project by using LPC2148.
i want to run dc motor with varying speed, with MATLAB via LPC2148.
please guide me, how to make interface between MATLAB and LPC2148.

Parents
  • 0 in reply to srihari chekuri

    Then you are going to have to spend time studying Matlab until you are sufficiently familiar with it!

    Matlab is not a Keil product - so this is not the place for Matlab support or training.

    As far as the LPC2148 is concerned, Matlab is irrelevant. The LPC2148 neither knows nor cares that it is talking to Matlab.

    As far as the LPC2148 is concerned, it just transmits and receive bytes via its UART - it makes no difference where they go to, nor where they come from.

Reply
  • 0 in reply to srihari chekuri

    Then you are going to have to spend time studying Matlab until you are sufficiently familiar with it!

    Matlab is not a Keil product - so this is not the place for Matlab support or training.

    As far as the LPC2148 is concerned, Matlab is irrelevant. The LPC2148 neither knows nor cares that it is talking to Matlab.

    As far as the LPC2148 is concerned, it just transmits and receive bytes via its UART - it makes no difference where they go to, nor where they come from.

Children
No data