• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1169 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ERROR

keval panchal

HI ALL,

WHEN I CONNECT THE ULINK2 TO MY PC IN DEVICE MANAGER IT IS SHOW THAT THE DEVICE IS CORRECTLY CONNECTED

I USE LPC2378 CONTROLLER.FIRST I COMPILE MY CODE IT GIVES ME A 0 ERROR.NOW I TRIDE TO DOWNLOAD MY CODE. BUT IT GIVE ME A ERROR LIKE "JTAG COMMUNICATION IS FAILED".

SO PLEASE TELL ME SOLUTION OF THIS PROBLEM???

I HAVE ONE QUARRY LIKE WHEN I GO IN FLASH TOOL->CONF. FLASH TOOL->DEBUG->SETTING.
THERE IS ASHOW ME A ULINK-ME DEVICE.
SO HOW CAN I CHANGE THIS DEVICE.????

Parents
  • 0 in reply to ImPer Westermark

    I validated every signal of jtag connection.
    Now i also able to download the code in my controller.
    my hardware is use for temprature measurement.

    Now I want to download hex/bin file using same ULINK2.so can y tell me the procedure of the same???
    Now i can able to download xxx.axf file.
    Now i want to dwnload xxx.hex file.so please help me.....

Reply
  • 0 in reply to ImPer Westermark

    I validated every signal of jtag connection.
    Now i also able to download the code in my controller.
    my hardware is use for temprature measurement.

    Now I want to download hex/bin file using same ULINK2.so can y tell me the procedure of the same???
    Now i can able to download xxx.axf file.
    Now i want to dwnload xxx.hex file.so please help me.....

Children
No data