• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 22 subscribers
  • Views 1324 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC17xx USBOTG using ISP1301

Mark Walters

Hi

Has anyone implemented USBOTG using ISP1301 on the LPC17xx range?

I am looking for a simple virtual com port solution...

Regards
Mark

Parents
  • 0 in reply to Mark Walters

    I don't know anything about OTG and the ISP1301 Universal Serial Bus On-The-Go transceiver. So the following information might be useless to you.

    There is an open source project "LPCUSB", which is developed with the GNU tool-chain, supports LPC21xx and LPC23xx MCU.

    sourceforge.net/.../

    I used the "LPCUSB" on the LPC2368 to develop an USB CDC device. It worked.
    (Need to do some slight modifications to port the "LPCUSB" to the KEIL tool-chain.)
    Then I migrate all the stuff to LPC1768, It seemed work.

Reply
  • 0 in reply to Mark Walters

    I don't know anything about OTG and the ISP1301 Universal Serial Bus On-The-Go transceiver. So the following information might be useless to you.

    There is an open source project "LPCUSB", which is developed with the GNU tool-chain, supports LPC21xx and LPC23xx MCU.

    sourceforge.net/.../

    I used the "LPCUSB" on the LPC2368 to develop an USB CDC device. It worked.
    (Need to do some slight modifications to port the "LPCUSB" to the KEIL tool-chain.)
    Then I migrate all the stuff to LPC1768, It seemed work.

Children
No data