This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Interfacing CD4052 with 2 uarts in 8051

Hey all,

I am doing a project on Vehicle Tracking System using GPS and GSM Modem.The 2 devices aforementioned communicates with 8051uC. But since there is only 1 UART in 8051 i have to use a analog multiplexer i.e CD 4062. I want to know how to interface it with GPS, GSM, and 8051.

Also it would be grateful if anyone could tell me how to parse output of GPS and how initialize a GPS receiver to that it starts giving me the GPRMC

Parents
  • I gave you a link to the Device Database Parametric Search - all you had to do was click it, and you could easily have found chips with 2 UARTs and all your other requirements.

    Did you do that? No - you just asked people to tell you chips.

    If you want people to believe that you are actually interested in doing some work yourself, then you need to demonstrate it!

Reply
  • I gave you a link to the Device Database Parametric Search - all you had to do was click it, and you could easily have found chips with 2 UARTs and all your other requirements.

    Did you do that? No - you just asked people to tell you chips.

    If you want people to believe that you are actually interested in doing some work yourself, then you need to demonstrate it!

Children