This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Interfacing CD4052 with 2 uarts in 8051

Hey all,

I am doing a project on Vehicle Tracking System using GPS and GSM Modem.The 2 devices aforementioned communicates with 8051uC. But since there is only 1 UART in 8051 i have to use a analog multiplexer i.e CD 4062. I want to know how to interface it with GPS, GSM, and 8051.

Also it would be grateful if anyone could tell me how to parse output of GPS and how initialize a GPS receiver to that it starts giving me the GPRMC

Parents
  • I would be using a SIM300 GSM modem and a GPS receiver
    with SiRFstarIIe-chip-set.......Now can I have the sample codes.please
    Also I think irrespective of what GPS receiver u choose the output is just the same. All I want from the GPS is the RMC data

    Also if u could suggest me a better GPS which highly accurate and also affordable at the same time I would be grateful.

Reply
  • I would be using a SIM300 GSM modem and a GPS receiver
    with SiRFstarIIe-chip-set.......Now can I have the sample codes.please
    Also I think irrespective of what GPS receiver u choose the output is just the same. All I want from the GPS is the RMC data

    Also if u could suggest me a better GPS which highly accurate and also affordable at the same time I would be grateful.

Children
No data