Keil forum code

State Not Answered
Locked Locked
Replies 8 replies
Subscribers 22 subscribers
Views 1340 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

code

kavin kumar over 15 years ago

PINSEL0_bit.P0_7 = 0x00;//set first functionality to port

IO0DIR_bit.P0_7 = 0x01; // set P0.7 port to output

IO0SET_bit.P0_7 = 0x01; // set P0.7 port to high//

the above code is not working

please sugest ant modification in above code to set a pin value in lpc2129 controller

Parents

0 kavin kumar over 15 years ago in reply to John Linq

i got the code from lpc2129 board seller's cd

i use realview mdk arm 3
Cancel
Vote up 0 Vote down

Cancel

Reply

0 kavin kumar over 15 years ago in reply to John Linq

i got the code from lpc2129 board seller's cd

i use realview mdk arm 3
Cancel
Vote up 0 Vote down

Cancel

Children

0 John Linq over 15 years ago in reply to kavin kumar

Check this link:
" href= "http://ics.nxp.com/support/documents/microcontrollers/zip/code.bundle.lpc213x.lpc214x.realview.zip"> ics.nxp.com/.../code.bundle.lpc213x.lpc214x.realview.zip
Cancel
Vote up 0 Vote down

Cancel
0 Andy Neil over 15 years ago in reply to kavin kumar

"i got the code from lpc2129 board seller's cd

i use realview mdk arm 3"

That information needs to be added to your original thread.
Cancel
Vote up 0 Vote down

Cancel
0 John Linq over 15 years ago in reply to John Linq

Search for a directory named "GPIO" in the Sample Code Bundle, then study it!
Cancel
Vote up 0 Vote down

Cancel