• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 21 subscribers
  • Views 3586 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MCB1700 virtual comport problem on win7

kyle adams

Hi,
I couldn't install the virtual comport driver given by NXP (USBCDC project) on win7.No problem on XP.
Is there anyone run USBCDC on win7 ?
Has anyone experiences about this subject?
Where can find a suitable driver for win7 if there exist?

I am waiting suggestions asap.

Thanks.

Parents
  • 0 in reply to Lillian XU

    Hi all,

    More infomation for my scenario. My machine is 64 bit Windows 7. I run the command " bcdedit.exe -set TESTSIGNING ON" in the command prompt and make the windows go to TESING MODE. However, I still get the same error message.

    I greatly apperiate any suggestions.

    Lillian

Reply
  • 0 in reply to Lillian XU

    Hi all,

    More infomation for my scenario. My machine is 64 bit Windows 7. I run the command " bcdedit.exe -set TESTSIGNING ON" in the command prompt and make the windows go to TESING MODE. However, I still get the same error message.

    I greatly apperiate any suggestions.

    Lillian

Children
  • 0 in reply to Lillian XU

    Finally, the driver is installed under WINDOWS 7. I add the part NTamd64 in the inf file.

    ;------------------------------------------------------------------------------
;  Windows 7-64bit Sections
;------------------------------------------------------------------------------

[STMUSB.NTamd64]
include=mdmcpq.inf
;CopyFiles=FakeModemCopyFileSection.NTamd64
CopyFiles=DriverCopyFiles.NTamd64
AddReg=STMUSB.NTamd64.AddReg


[STMUSB.NTamd64.AddReg]
HKR,,NTMPDriver,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
HKR,,PortSubClass,1,01

[STMUSB.NTamd64.Services]
include=mdmcpq.inf
AddService=usbser, 0x00000002, DriverService.NTamd64


[DriverService.NTamd64]
DisplayName=%DESCRIPTION%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\usbser.sys

[STMUSB.NTamd64.HW]
include=mdmcpq.inf

    Have a good weekend.

    Lillian

  • 0 in reply to Lillian XU

    Hi Lillian,

    Could you please send the hole INF file. Thus, It will be a certain reference for me and the others.

    Thanks,
    Regards.

  • 0 in reply to kyle adams

    Here is my inf file.

    
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%STM%
LayoutFile=layout.inf
DriverVer=01/06/07

[Manufacturer]
%STM%=DeviceList, NTamd64

[DestinationDirs]
;FakeModemCopyFileSection=12
;FakeModemCopyFileSection.NTamd64=12
DefaultDestDir=12


[DeviceList]
%DESCRIPTION%=STMUSB, USB\VID_0483&PID_5740
[DeviceList.NTamd64]
%DESCRIPTION%=STMUSB, USB\VID_0483&PID_5740

;------------------------------------------------------------------------------
;  Windows 2000/XP Sections
;------------------------------------------------------------------------------

[STMUSB.nt]
include=mdmcpq.inf
;CopyFiles=FakeModemCopyFileSection
CopyFiles=DriverCopyFiles.nt
AddReg=STMUSB.nt.AddReg


[STMUSB.nt.AddReg]
HKR,,NTMPDriver,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
HKR,,PortSubClass,1,01

[STMUSB.nt.Services]
include=mdmcpq.inf
AddService=usbser, 0x00000002, DriverService


[DriverService]
DisplayName=%DESCRIPTION%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\usbser.sys
HKR,,PortSubClass,1,01

[STMUSB.nt.HW]
include=mdmcpq.inf

;------------------------------------------------------------------------------
;  Windows 7-64bit Sections
;------------------------------------------------------------------------------

[STMUSB.NTamd64]
include=mdmcpq.inf
;CopyFiles=FakeModemCopyFileSection.NTamd64
CopyFiles=DriverCopyFiles.NTamd64
AddReg=STMUSB.NTamd64.AddReg


[STMUSB.NTamd64.AddReg]
HKR,,NTMPDriver,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
HKR,,PortSubClass,1,01

[STMUSB.NTamd64.Services]
include=mdmcpq.inf

  • 0 in reply to Lillian XU

    Thanks to everyone who wrote in this thread.
    This is my INF file.

    [Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%PRVDR%
LayoutFile=layout.inf
DriverVer=22/03/2010,2.0.2200.2

[Manufacturer]
%MFGNAME%=VirComDevice,NT,NTamd64

[DestinationDirs]
DefaultDestDir = 12

[VirComDevice.NT]
%DESCRIPTION%=DriverInstall,USB\VID_1FC9&PID_2002

[VirComDevice.NTamd64]
%DESCRIPTION%=DriverInstall,USB\VID_1FC9&PID_2002

[DriverInstall.NT]
Include=mdmcpq.inf
CopyFiles=FakeModemCopyFileSection
AddReg=DriverInstall.NT.AddReg

[DriverInstall.NT.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.NT.Services]
AddService=usbser, 0x00000002, DriverServiceInst

[DriverServiceInst]
DisplayName=%SERVICE%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary= %12%\usbser.sys
LoadOrderGroup = Base

[Strings]
PRVDR       = "ProviderNAME"
MFGNAME     = "ManfNAME"
DESCRIPTION = "MyUSB_CDC"
SERVICE     = "MyUSB_CDC driver"