We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi, i also facing same problem as some other yappers here.
I want to build a simulator for a 50A 13.6V switching charger for car battery.
Does anyone have a good simulation for a schematic and dsesign
Bye friends.
Sorry. I try again.
Hi, i am also facing the same problem as some other yappers here.
I want to build a simulator for a 50A 13.6V switching charger for my car battery.
Does anyone have a good simulator for the schematic drawing and a desesign. I want to simulate the drawing.
That is no help at all: you have simple repeated the question - you have not explained anything!
In particulat, what do you mean by "simulator" here? What, exactly, do you want this "simulator" to do?
SPICE has already been mentioned - have you looked at it? If it doesn't meet your needs, then explain how.
I want to simulate the drawing.
I have simulated a drawing, but, of course, since i have only simulated it, there is no drawing.
ANSWER THE QUESTIONS ASKED, just reposting will get you nowhere.
Erik
I will try again for you but do not post if you do not know the answer.
I want to build a SIMULATOR for my car battery charger. it must simulate 50A at 13.6V. it is switching.
Anyone have a good simulator for the schematic drawing and a desesign. I want to simulate the drawing.
it will run in C on the keil evaluator first so have you got good code in C.
Nobody can have any chance of knowing the answer when it's not even clear what the question is!
Simply re-typing exactly the same text - but with SIMULATOR in uppercase - does not clarify or explain anything!
Anyone?
Please. Time is running out.
So you have two choices:
1. get on with doing it yourself;
2. explain it properly so that others can uderstand what you require!
"Time is running out."
Not here. Time is well under control.