This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

using IAP for flash writing with working ethernet

I use lpc2378 and can write to flash with IAP, but if I have working ethernet (based on easyweb sample) then...
then a number of things occure exept normal work.

Anybody uses write data to flash with ethernet ?

Parents
  • Hi,

    As you say, that you first copy your interrupts into RAM and then change MEMMAP to reflect this.

    I am also trying for the same.

    I am able to map the interrupt vectors in RAM.But my problem is how to execute irq from RAM while IAP.

    I am working with LPC2468

    Awaiting reply.

    Anu

Reply
  • Hi,

    As you say, that you first copy your interrupts into RAM and then change MEMMAP to reflect this.

    I am also trying for the same.

    I am able to map the interrupt vectors in RAM.But my problem is how to execute irq from RAM while IAP.

    I am working with LPC2468

    Awaiting reply.

    Anu

Children
No data