cpu: at91sam7x256
I have in my project some global objects, they are by default placed at address 0x200000. My program seems to work properly but occasionally beginning of RAM is filled with zeros by Keil library function at label: __decompress1 in deassembly window. It makes some my variables and pointers are useles and program stops responding. The worst is, that pointers are defined as const and they are not expected to change.
Any idea how to solve this error?
T_Bit EQU 0x20 PRESERVE8 ; 8-Byte aligned Stack AREA SWI_Area, CODE, READONLY ARM EXPORT SWI_Handler SWI_Handler STMFD SP!, {R12, LR} ; Store R12, LR MRS R12, SPSR ; Get SPSR STMFD SP!, {R8, R12} ; Store R8, SPSR TST R12, #T_Bit ; Check Thumb Bit LDRNEH R12, [LR,#-2] ; Thumb:Load Halfword BICNE R12, R12, #0xFF00 ; Extract SWI Number LDREQ R12, [LR,#-4] ; ARM: Load Word BICEQ R12, R12, #0xFF000000 ; Extract SWI Number LDR R8, SWI_Count CMP R12, R8 BHS SWI_Dead ; Overflow ADR R8, SWI_Table LDR R12, [R8,R12,LSL #2] ; Load SWI Function Address MOV LR, PC ; Return Address BX R12 ; Call SWI Function LDMFD SP!, {R8, R12} ; Load R8, SPSR MSR SPSR_cxsf, R12 ; Set SPSR LDMFD SP!, {R12, PC}^ ; Restore R12 and Return SWI_Dead B SWI_Dead ; None Existing SWI SWI_Cnt EQU (SWI_End-SWI_Table)/4 SWI_Count DCD SWI_Cnt IMPORT __SWI_0 IMPORT __SWI_1 SWI_Table DCD __SWI_0 ; SWI 0 Function Entry DCD __SWI_1 ; SWI 1 Function Entry SWI_End END
Do you think I should change something? This code touches SPSR to switch beetwen ARM and Thumb... Maybe I missed it touches int falgs...