This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

stack initislization in 8051

Hi All,
In 8-bit microcontrollers which has upper 128 bytes of internal indirectly addressable RAM, Is stack initilizes from this upper or lower internal RAM address?

Thanks and Regards,
Ashutosh Tiwari

Parents
  • "...considered 'safe' rather than 'working values'"

    Either way, they are both predictable and usable - Heck, I wouldn't be too happy if the processor reset state were to allow interrupts to occur after the reset and before I had a chance to configure the interrupt sources as required.

Reply
  • "...considered 'safe' rather than 'working values'"

    Either way, they are both predictable and usable - Heck, I wouldn't be too happy if the processor reset state were to allow interrupts to occur after the reset and before I had a chance to configure the interrupt sources as required.

Children
No data