• State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 22 subscribers
  • Views 4433 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Communication Between Two GSM(SIM-508) module

Mohit Rawat

How can i communicate between two GPRS enabled,SIM-508 module, using AT command via hyper-terminal of PC.

Parents
  • 0 in reply to KK KK

    Unless KK is the same as Mohit Rawat, this is the wrong thread. Create your own thread, and deactivate the caps-lock key and then write a proper problem description, followed by any questions you have and possibly relevant parts of source code.

    Right now, you haven't even explicitly said if the ARM is sending the junk characters or the GSM module. And you haven't said what AT commands and if you wait the required time between the commands etc...

    But once more: One problem, one thread. And don't reuse other peoples thread unless your problem is identical and you can supply solutions or better descriptions how to reproduce the problem.

Reply
  • 0 in reply to KK KK

    Unless KK is the same as Mohit Rawat, this is the wrong thread. Create your own thread, and deactivate the caps-lock key and then write a proper problem description, followed by any questions you have and possibly relevant parts of source code.

    Right now, you haven't even explicitly said if the ARM is sending the junk characters or the GSM module. And you haven't said what AT commands and if you wait the required time between the commands etc...

    But once more: One problem, one thread. And don't reuse other peoples thread unless your problem is identical and you can supply solutions or better descriptions how to reproduce the problem.

Children
No data