• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 21 subscribers
  • Views 1213 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

uV3 cannot change number base using menu

Tim Suszek

I recently upgraded my uV3 to 3.62c. When I right-click over a variable in my watch list, a drop-down menu appears with a "Number Base" item. Neither of the two options (hex or decimal) work.

If I add the base to the variable name (e.g. "tempvar,10" or "tempvar,16") the base is displayed correctly. While this works around the problem for watched vars, it does not help the display of all my locals (which can not be modified).

My older version did not have this problem. Has anybody else seen this behavior?

If it matters:

IDE-Version:  µVision3 V3.62c
Copyright (c) Keil Elektronik GmbH / Keil Software, Inc. 1995 - 2008

Tool Version Numbers:
Toolchain:        PK51 Prof. Developers Kit  Version: 8.16
Toolchain Path:    C:\Program Files\Keil\C51\BIN\ 
C Compiler:        C51.Exe       V8.16
Assembler:         A51.Exe       V8.01
Linker/Locator:    BL51.Exe      V6.15
Librarian:         LIB51.Exe     V4.24
Hex Converter:     OH51.Exe      V2.6
CPU DLL:           S8051.DLL     V3.63
Dialog DLL:        DCYG.DLL      V2.55
Target DLL:        BIN\SiC8051F.dll       V2.7.0.0
Dialog DLL:        TCYG.DLL      V2.56

Parents
  • 0 in reply to doubt that my ISP Al Bradford

    I've heard nothing back from Keil but hey, as long as they listen to you, here's another nit-picky one they can fix:

    While stepping thru debug, a right-click over a source variable displays a drop-down menu. For the "Go to reference to <varname>" menu item, a blank icon is shown.

    I upgraded uV3 and my SiLabs MCU driver at the same time so I don't know which to praise, but my debugger now runs much faster! Tell them to keep up the good work.

Reply
  • 0 in reply to doubt that my ISP Al Bradford

    I've heard nothing back from Keil but hey, as long as they listen to you, here's another nit-picky one they can fix:

    While stepping thru debug, a right-click over a source variable displays a drop-down menu. For the "Go to reference to <varname>" menu item, a blank icon is shown.

    I upgraded uV3 and my SiLabs MCU driver at the same time so I don't know which to praise, but my debugger now runs much faster! Tell them to keep up the good work.

Children
No data