I just would like if there's any easy way to integrate a PIC on the Keil Board, the aim would be to input the program through an external PIC programmator and to send a simple instruction to the PIC through KEil board and to recover a signal from the PIC at the end of the program. Once this would work, I would like to change the PIC program through the Keil ULINK2. IS it possible and HOW Thanks
If you need to transmit parameters, it is easiest to connect a large number of PIC chips with SPI. If you need to send new programs to the PIC chips, you have to check with someone who are more familiar with them if they ave a good method for in-system-programming or in-application-programming.