Can anyone explain me what is FCAN,BCAN, MSCAN,LSCAN,FSCAN? How are they different from one another, is it only the speed of the can that decides or is there any other parameter that decides the category of these buses. Thanks
There abbreviations are not different buses. There tools apparently can not support the entire speed range of the CAN bus at once. Find your baud rate, read the CANoe manual and select the proper options.
Hi neil; Sorry for late reply from my side. Ya thats true, all 3 CAN bus use different speed and use different types of interface cables and all 3 does not have CAN HI and CAN LOW and Groung. Some have CAN HI and +12V and Ground. but if I look at baud rate Medium and low speed operate at interchangable speeds. then why this discrimination. But even though the speed are interchangable, I have to use correct cable for my application or else it will not work.
These are all manual Questions. The baud rate and other settings must be correct. T he device may adjust the slew rate. I do not have one. I used a different brand.