This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UVSC_DBG_MEM_READ (UVSC) broken?

hi.
i am trying to read out some memory using uVision socket interface and UVSC_DBG_MEM_READ. the result is UVSC_STATUS_SUCCESS, but in fact there is not data returned. UVSC_Tester.Exe seems to have the same problem (AMEM.aBytes is empty).

does anyone have a working example of reading out memory using UVSC_DBG_MEM_READ?

Parents

0 Richard Sewell over 17 years ago in reply to Andre Frambach

Hi Andre,

I have checked the UVSC_DBG_MEM_READ command with an LPC2294 both in simulation and and on a real hardware target, and have found it to work correctly. I performed this testing using the UVSC Tester V2.05.

Please update to the latest RealView MDK available at http://www.keil.com/update/rvmdk.asp and then contact support.intl@keil.com if you are still having an issue with this.

Best Regards,
Richard
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Richard Sewell over 17 years ago in reply to Andre Frambach

Hi Andre,

I have checked the UVSC_DBG_MEM_READ command with an LPC2294 both in simulation and and on a real hardware target, and have found it to work correctly. I performed this testing using the UVSC Tester V2.05.

Please update to the latest RealView MDK available at http://www.keil.com/update/rvmdk.asp and then contact support.intl@keil.com if you are still having an issue with this.

Best Regards,
Richard
Cancel
Vote up 0 Vote down

Cancel

Children

No data