• State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 22 subscribers
  • Views 2153 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Interrupts for AT89C51CC03

Julian Gebhardt

Hello,

I want to programm the interrups for the at89c51cc03 in C.
But I can't find how i have to do this.

i have the configuration from the datasheet. but how look the "interrupt funktion header"??

Parents
  • 0 in reply to Julian Gebhardt

    why should i use hours for hours to search for the answer?

    because in the search for the answer you need right now, you will learn where to find the answers to future questions.

    Nobody I know will know everyting in the manuals, but any decent user will know (or, at least, have an idea) where in the manuals to look for an answer.

    Familiarrity with the manuals is essential to being productive.

    Erik

Reply
  • 0 in reply to Julian Gebhardt

    why should i use hours for hours to search for the answer?

    because in the search for the answer you need right now, you will learn where to find the answers to future questions.

    Nobody I know will know everyting in the manuals, but any decent user will know (or, at least, have an idea) where in the manuals to look for an answer.

    Familiarrity with the manuals is essential to being productive.

    Erik

Children