• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 22 subscribers
  • Views 6335 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Erasing a sector from the internal memory block

Simon May

Hello,

I have a problem when erasing the internal memory block on an XC167CS-32F microcontroller.

I can erase sectors 0, 1, 2, and 3 OK. Sector 4 fails to erase, but then sectors 5, 6, and 7 erase OK.

I can write to all of the sectors (with the exception of sector 3).

The Keil uVision 'Flash->Erase' instruction DOES manage to do the erase correctly, so I know that my device is OK - it is just down to something that I am doing wrong.

Is it possible that one of the sectors (sector 4) has become 'protected', and if so, how do I go about reseting things so that the sector is no longer protected !

Thanks for you help,

Simon May

Parents
  • 0 in reply to Simon May

    Weds 30th January, 2008 - an update

    To recap :

    Code written which is loaded onto the internal flash ROM module of an XC161CS-32F microcontroller.

    Erase routines have been written which are stored in ROM but copied from ROM to RAM and executed from RAM.

    The erase routines work on sectors which have small amounts of data in.

    In the MAIN module, include a const declaration :

    const  char  A_str [ 100 ] = "this is a string" ;

    With the memory model, 'small', selected, this const gets located to address 0xC04000.

    When the erase routines are executed, they work fine.

    If the const declaration is changed to :

    const  char  A_str [ 200 ] = "this is a string" ;

    ie: if the size is changed from 100 to 200, the erase routines execute, cause no FSR error, but do not actually erase the sector.

    I am somewhat perplexed !

    Any thoughts are much appreciated,

    Thanks,

    Simon May

Reply
  • 0 in reply to Simon May

    Weds 30th January, 2008 - an update

    To recap :

    Code written which is loaded onto the internal flash ROM module of an XC161CS-32F microcontroller.

    Erase routines have been written which are stored in ROM but copied from ROM to RAM and executed from RAM.

    The erase routines work on sectors which have small amounts of data in.

    In the MAIN module, include a const declaration :

    const  char  A_str [ 100 ] = "this is a string" ;

    With the memory model, 'small', selected, this const gets located to address 0xC04000.

    When the erase routines are executed, they work fine.

    If the const declaration is changed to :

    const  char  A_str [ 200 ] = "this is a string" ;

    ie: if the size is changed from 100 to 200, the erase routines execute, cause no FSR error, but do not actually erase the sector.

    I am somewhat perplexed !

    Any thoughts are much appreciated,

    Thanks,

    Simon May

Children
  • 0 in reply to Simon May

    This issue has now been resolved.

    It turns out that the code that I have been using from the start HAS been working.

    The reason that I thought that it was NOT working was that the UVision debugger memory window was showing me that the flash ROM module contained data.

    I eventually used the Infineon memtool to download the contents of the internal flash ROM module and when I looked at the resultant data files, I could see that the internal flash ROM module HAD in fact been erased.

    Simon May