We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi Chris, iÂ'm not getting your explanations very well, but hier is what iÂ've done: void init (void) { EBCMOD0 = 0x7400; EBCMOD1 = 0x003F; SYSCON3_CC6DIS = 0; ALTSEL0P1L_P0 = 1; ALTSEL0P1L_P1 = 1; DP1L_P0 = 1; DP1L_P1 = 1; P1L_P0 = 1; P1L_P1 = 1; } iÂ've took this ports-bits in the header file "xc16x.h". So if you can explain me deeper youÂ've sent me iÂ'll very thanksfull. P.S: IÂ'm not an AS in programing you can also send me a mail at: djabson@yahoo.fr if you want. thanks in advance
Please, these are threads. You don't need to start new threads for every little sub-problem you have about the same thing.
Continue within one thread until you have got your PWM problems solved.
These are other threads about your PWM problems:
http://www.keil.com/forum/docs/thread11363.asp http://www.keil.com/forum/docs/thread11362.asp
It gets very hard for you and others to try to follow this discussion if it is splitted into a large set of threads...
Please read the instructions on how to post source code: www.danlhenry.com/.../keil_code.png