We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi all, I have two ST91SAM7X256-EK boards. One of them works fine with the ULINK (which means it is working properly, jumpers are correctly installed,etc...) the other board does not work with the ULink. When I try to download/program the board, I keep getting the following pop-up window: Could not stop ARM device! Please check JTAG Cable.
Anyone having similar problems? Any suggestions would be great.
Thanks.
Vartan; I do not use your board but on the LPC2148 there is a jumper that will give the same problem. The jumper is on the Comm0 DTR signal I believe. Please compare all jumpers setting between the two boards. Bradford
Thanks Bradford, I actually gave up and uninstalled all related software and tools and reinstalled the latest package for my board. That fixed it. I don't know why that actually happened - meaning if both boards were not working, I will understand that maybe some driver or configuration got corrupted. But one worked and the other didn't?!?! I didn't have to change anything on the boards though, but I do appreciate your suggestion, it made me check and compare both boards.
Vartan
That is odd that one board works and the other fails on the same software. But thanks for the update. I'm sure others will run across a similar problem in the future. Bradford