We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi,
I bought a EMP900 thinking I was getting a programmer and emulator that was not crippled. I understood that there was an evaluation version of some c compiler that I could look at. Now I am finding that the only way to use the EPM900 is though the IDE which is limited to 4K.
I am actually using another compiler so I don't want to buy the uVision tools.
I have been using the hex file output of my compiler to program the emulator.
Now I am finding that with only 2K of code the software is saying that I have 8K of data, which is over the limit of 4K. It's only 2K - I can see in the hex file.
Can anyone help me ? I just want to be able to use the product I bought.
Alex
But you have only bought an emulator. You haven't bought any software licenses.
The following page describes the kit contents: http://www.keil.com/support/man/docs/epm900/epm900_in_contents.htm
It clearly says:
The EPM900 LPC Emulator kit includes: * The EPM900 Emulator Board. * A standard, USB A-B cable. * A 48-pin, DIP to DIP ribbon cable. * A CD-ROM that includes: o An evaluation version of the µVision LPC900 Development Studio. o The EPM900 Emulator Board User's Manual (this manual).