We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I've just tried to change an example code of LPC21xx for MCB2300 with LPC2378. Blinky with RTOS.
Linking... Program Size: Code=4688 RO-data=52 RW-data=52 ZI-data=2812 "Taskk.axf" - 0 Error(s), 0 Warning(s). Load "c:\\Keil\\ProjARM\\EX29-RTL Task Management\\Taskk.AXF" Cannot Write to RAM for Flash Algorithms ! Erase Failed!
RAM for Algoritm set as recomended by Keil.
What can be wrong?
With best regards, S.
This can have two reasons:
a) JTAG clock set to high. Use RTCK or 200KHz as JTAG clock for this device.
b) Project - Options - Utilities - ULINK Settings - RAM for Algorithm incorrect. Should be Start: 0x40000000 Size: 0x800 for this device.
Thanks,
it was 1Mhz.
Regards