We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello everyone. Our target system is NXP LPC2468.
Recently we have purchased an IAR J-Trace/J-Tag hardware with orientation on IAR Development Environment (and compiler). After some time (and plenty of discussions) we think that KEIL uVision IDE (and compiler) is more likely the thing that we needed.
The question is: "What do we need to do, to work with IAR(SEGGER) J-Trace/J-Tag in KEIL uVision?". As I know SEGGER RDI driver is made for that. However, does it have support for trace and at least debugging functions in KEIL uVision?
Finally: "How good is ULINK2 USB-JTAG Adapter (maybe the better thing is to buy it with uVision, than to use IAR + RDI in KEIL DE), any trace support at all?"
Best regards.
The problem is that I don't have the Serial Number of product, which is needed in the form. We are willing to buy KEIL but first of all we need information on IAR J-Trace/J-Tag support in KEIL uVision(see on top).
If it isn't support for a product you own, then it should be easy to do what most customers do. Use their US or international contact address (as available on the 'Contact' web page) or contact a local Keil distributor.
This is basically a pre-sales matter.
http://www.keil.com/company/contact.asp