We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi, Iam working on LPC248 OEM board ,where iam testing the delays in RTX kernel.
In configuration file i set the value as shown below.
#define OS_TICK 10000
Can anybody explain what is the meaning of this?
In
os_dly_wait(100)
i kept 100 as sytem ticks.
The above delay work as 1sec delay.
My aim is to get the delay of 1sec ,what are the changes i needed in configuration file?
I have doubts on the below values
#define OS_TIMER 0 #define OS_CLOCK 12000000
How can i set the correct values.
The code is what i used for configuring the PLL
/* Fcck = 57.6Mhz, Fosc = 288Mhz, and USB 48Mhz */ #define PLL_MValue 11 #define PLL_NValue 0 #define CCLKDivValue 4 #define USBCLKDivValue 5 /* System configuration: Fosc, Fcclk, Fcco,Fpclk must be defined */ /* PLL input Crystal frequence range 4KHz~20MHz. */ #define Fosc 12000000 /* System frequence,should be less than 80MHz. */ #define Fcclk 57600000 #define Fcco 288000000 /* APB clock frequence , must be 1/2/4 multiples of ( Fcclk/4 ). */ #define Fpclk (Fcclk / 2)
This is what i have done in my code.
My goal is verifying the delays with real time clock. I want to see the printed count values for 1 sec which was compared to real time.
If i give any trouble sorry for that!!