• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 678 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

setting channels in nRF24e1

Ana A

I am trying to cange the channel and power in the nRF24e1 but I don't obtain results.
A basic code for getting this maybe as follows:


    CS = 1;
    DELAY_100us(0);
    SPI_ReadWrite(CHANNEL);
    DELAY_100us(0);
    for(b=0;b<rxconf.n;b++)
    {
        SPI_ReadWrite(rxconf.buf[b]);
    }
    CS = 0;

Is this correct?

Parents
  • 0 in reply to Dan Henry

    The values for the buf are these:

    const RFConfig txconf =
{
    15,
    0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x12, 0x34, 0x56, 0x78, 0x83, 0x6c, 0x04
};

const RFConfig rxconf =
{
    15,
    0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x87, 0x65, 0x43, 0x21, 0x83, 0x6c, 0x05
};

    The datasheet prescribes that the 2-byte configuration word must be transmitted prior to the RxTxConfBuf. I think so. Is this correct?

Reply
  • 0 in reply to Dan Henry

    The values for the buf are these:

    const RFConfig txconf =
{
    15,
    0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x12, 0x34, 0x56, 0x78, 0x83, 0x6c, 0x04
};

const RFConfig rxconf =
{
    15,
    0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x87, 0x65, 0x43, 0x21, 0x83, 0x6c, 0x05
};

    The datasheet prescribes that the 2-byte configuration word must be transmitted prior to the RxTxConfBuf. I think so. Is this correct?

Children