We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
guys iam new to this area i have started working on this thing since last week i am testing UART program using 89c52 with baudrate 2.4k(0xf4). using 11.592 crystal and sample program is from atmel. nothing is coming out from that txd pin. please help me..
it would not be that you do not have a MAX232(equivalent) in the circuit, would it?
Since you did not answer "nothing is coming out from that txd pin. ... Is that determined with a scope?" I guess you are 'testing' by communicating with a PC, you do not ssy.
Erik
my intension is to send data over RF i am using RF434 transmitter module. i was checking if there are any voltage transition levels at txd pin...
at this point i just want to send some data over rf 434 for 434 it was given that max data rate 3kbps so set the baud rate 0xf4 2.4kbps and sending 'a' repeateadly over air.
i was checking if there are any voltage transition levels at txd pin... with WHAT? a scope?, a LED?, a voltmeter? a rusty nail?
oscilloscope
try wiggling a port pin and scope on that