We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi everyone,
Is there any way in which I can interface a GSM modem with a 8051 and retrieve the decoded SMS. The motivation behind this is that... even if i can get the encoded SMS from the GSM modeme using AT commands, the decoding complexity is very high for a 8051. And I think the GSM module should have some kind of decoding code (using this would be benificial and reduce code complexity for 8051)
Also please let me know exactly how to interface the GSM modem to 8051. I dont want a PC interface in between.
Please help me out..
Sambit NIT ROURKELA
You're doing it again!
You really do need to pay attention to the 'Preview' - your Bold & Italic formatting didn't work either, did they?!
Yes, "Hypoterminal" (sic) is a malapropism - a deliberate error for humourous effect: " Presumably, they called it "Hyper-terminal" to give the impression that it's "so much more" than a plain old terminal. en.wiktionary.org/.../Hyper-
But many would agree that "Hyperterminal" is a rather poor terminal - it has too many quirks, limitations, and annoyances. Hence I call it "Hypo-terminal" to indicate its deficiencies: en.wikipedia.org/.../Hypo
I don't know if you're the first to notice this, but you're certainly the first to comment!
Andy isn't the only one to write Hypoterminal on this forum. I think it's the most common name used.
I tend to use the correct M$ (see, I also like to change some names (: ) name, just to make sure that there is no single way of understanding what program to use.
"Andy isn't the only one to write Hypoterminal on this forum."
And there was me thinking I was being original! Foiled again! :-(
In fact, I did a quick search, and found that "Hypoterminal" is quite widely used on many other forums...