Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.

We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.

Thank you for your understanding.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 924 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem using ADuC RTX_Config.c

emil georgiev

Hi all!
I'm trying to run the RTX_Blinky example supplied for the ADuC7024, but am receiving the following errors during compilation of RTX_Config.c:

RTX_Config.c(207): error: A1150E: Bad symbol, not defined or external
RTX_Config.c(220): error: A1150E: Bad symbol, not defined or external

for

(207):       STMDB   SP!,{R0}            ; Save R0
(220):       LDMIA   SP!,{R0}            ; Restore R0


I'm no good in assembler at all, but the replacement of SP with R13 seems to do the job. Is this correct?

P.S.
The RTX_Conf_ADuC702x.c in the \RV30\Startup\ADI\ has the same problem!

Parents Reply Children