• State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 21 subscribers
  • Views 1574 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Output compare interrupt

Peter Row

i would like to use the output compare 1 Interrupt. What do I have to add (or remove) to following code, so that it works?

   TIM_InitStructure.TIM_Mode = TIM_OCM_CHANNEL_1;
   TIM_InitStructure.TIM_OC1_Modes = TIM_TIMING;
   TIM_InitStructure.TIM_Clock_Source =TIM_CLK_EXTERNAL;
   TIM_InitStructure.TIM_Pulse_Length_1 = 25000;

   TIM_Init (TIM1, &TIM_InitStructure);
   TIM_CounterCmd(TIM1, TIM_START);

   VIC0->VAiR[5]   = (unsigned int)TIM1_IRQ_Handler;

kind regards
don

Parents Reply Children
No data