Keil forum ATMEL SAM7X EK TCP/IP DEMO program can't Work

State Not Answered
Locked Locked
Replies 1 reply
Subscribers 22 subscribers
Views 747 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ATMEL SAM7X EK TCP/IP DEMO program can't Work

ying lu over 19 years ago

ATMEL SAM7X EK TCP/IP DEMO program can't Work

Parents

0 Keil Software Support Intl. over 19 years ago

We have tested the RTL-ARM example one more time on the Atmel AT91SAM7X-EK Evaluation Board. It just works fine. However the example needs a DHCP server in a network.

The configuration required to run the application is described in:
http://www.keil.com/appnotes/docs/apnt_192.asp - under TCP/IP Connections - Connection to LAN/WAN.
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Keil Software Support Intl. over 19 years ago

We have tested the RTL-ARM example one more time on the Atmel AT91SAM7X-EK Evaluation Board. It just works fine. However the example needs a DHCP server in a network.

The configuration required to run the application is described in:
http://www.keil.com/appnotes/docs/apnt_192.asp - under TCP/IP Connections - Connection to LAN/WAN.
Cancel
Vote up 0 Vote down

Cancel

Children

No data