I'm working on a Linux based project with the Nohau LPC3000 Evaluation Board (uses the ARM926EJ-S CPU). The product page for this board can be found here: http://www.nohau.com/emularm/lpc3000_board.html I would now like to flash my built u-boot and Kernel images but the flash chip on this board is not listed in the Keil uvision "Flash download setup" for the Ulink programmer. Any ideas on how I can configure the Ulink for flashing this board? The flash chip used is a STMicroelectronics NAND256R3A which is a 32MByte NAND flash chip. Thanks in advance for any information provided. Best regards, Josh Green
Josh, afaik, they only flashing program available for the LPC3000 board is through the Nohau JTAG debugger. Robert