This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Porting Chipcon's CC2430 examples to KEIL's 51 environment

Hi!

I would like to use KEIL's C51 tools for Chipcons CC2430 instead of IAR's buggy IDE... What is the best way to port the Chipcons example files (from their website) writen for IAR's EW? Has someone allready done this and is there a downloadable conversion available?
Chipcon's IAR deal seems to limit their support in this issue...

Parents
  • I have contacted Chipcons support twice and at the second time i got the honest answer:

    Application examples for the new generation of Chipcon RF chips (CC2430,CC2510 and CC1110) are written for use with the IAR tool chain only. Support for Keil on these products is unfortunatley not provided.

    You may still of course port the examples to Keil but there is no Keil debugging environment for the new generation of chips.


    So thats it, have to start working...

    -Timo

Reply
  • I have contacted Chipcons support twice and at the second time i got the honest answer:

    Application examples for the new generation of Chipcon RF chips (CC2430,CC2510 and CC1110) are written for use with the IAR tool chain only. Support for Keil on these products is unfortunatley not provided.

    You may still of course port the examples to Keil but there is no Keil debugging environment for the new generation of chips.


    So thats it, have to start working...

    -Timo

Children
No data