• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 21 subscribers
  • Views 1055 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

In System Debugging

Elisa O

I'd just like to know how I can debug on the eval board, Keil.com explain how to use the ISD51 but when I run the InSystem Debugger, it cannot find my target... maybe it comes from the configuration of the serial communication.

Thanks for your help.

Parents
  • 0 in reply to Andy Neil

    Sorry, I'm not clear
    In fact it's ok the project can be build and the target is created, then I run the debug session and after Keil tried to make the ISD51 connection, a message error appear :
    ISD51 Monitor Error
    There was no reply from the target system...

    Then there some points to check that seems good to me. Have you try to run the Generic 8052 example in Keil ISD51 Debug ?

Reply
  • 0 in reply to Andy Neil

    Sorry, I'm not clear
    In fact it's ok the project can be build and the target is created, then I run the debug session and after Keil tried to make the ISD51 connection, a message error appear :
    ISD51 Monitor Error
    There was no reply from the target system...

    Then there some points to check that seems good to me. Have you try to run the Generic 8052 example in Keil ISD51 Debug ?

Children
No data