Dear All
have a nice day
Please advice about a programmer That I can use to program LPC922F Microcontroller
As well as following too
IDE to program
Flash software
Thanks in advanced
to program:/IDE: Keil to download to flash: FlashMagic (if it still is around)
If you are just starting I suggest you switch to SiLabs where excellent free tools are available. Also SiLabs have current '51s the NXP ones are aging
Dear Sir Thank you so much for the advice
It would be grate if you can advice what is the cheap programmer tat I can use for flash
I have USBISP programmer that I used to program AVR Like Mega 328P Can I use it to program LPC922F
I also have USB to RX TX converter
Please advice
Thanks in advice
FlashMagic is free
Hi
Please advice what is the programmer that I can use program LPC922F
already answered
I am asking about hardware honestly please advice
http://www.keil.com/dd/chip/3548.htm Bunch of Dataman hardware listed, barking up a pretty obsolete tree, consider redesign using current/viable parts
Or build something to support your own use case moving forward www.teamfdi.com/.../ICP_LPC9xx_v24.pdf
Is FlashMagic no longer available, then?
Apparently not the answer the OP is seeking.
Just needs a serial port, right?
Yes, that is my recollection.
(although it is a long time ago)
http://www.flashmagictool.com/
I have seen That PICkit 2 also using SDA and SCL for programming data and clock
Any one have a experience in this regard woth LPC922F
Did you notice anything about SDA and SCL in the user manual for the part?