hi all,
i am using Ethernet bootloader on Cortex-M3 LPC1768. The bootloader sample code used was provided by Flash Magic. i have configured the bootloader code locatio from 0x0000 to 0x2000 and application code location from 0x2000 to 0x80000. it is working properly when i erase the full chip, load the application code first then bootloder code. But if i load the bootloader code first then application code, execution is not jumping to application code. what colud be the problem? please suggest.
Take a look at: http://www.keil.com/support/docs/3913.htm
Specifically refer "Jumping to the user application requires a number of steps before the user application can be executed"
hi. how to ignore minutes in time data?