First, I am using 7.5 so it is an old compiler, but that is the way it is.
I have a number of bit variables that I am trying to pack into a byte. they are scattered all across the bit area
volatile bit var1; volatile bit var2; volatile bit var3;
char result;
The compiler won't let me do
result= (var1 <<1) | (var2 <<2) | (var3 <<4); the only way I have been able to get this to work is result= var1; result= ((((result << 1) | var2)<<1) | var3)<<1); This results in very inefficient code mov a,result mov r7,a mov c,v2 clr a rlc A orl A,R7; add A,ACC mov a,r7 mov c,var3 rlc A orl A,R7 add A,ACC mov a,r7 etc. as compared to: mov A,result mov c,v2 rlc a mov c,v3 rlc a would be much better. Does anyone know how this might be forced in C, without resorting to assembly? I'm wondering if because the ACC and PSW are evenly divisible by 8, whether or not you can use those and explicitly use the _crol_ intrinsic to accomplish this. I have not had any luck so far. In this case memory efficiency is more important than speed.
why not 'pack' in the definitions
u8 bdata packer sbit packbit1 packer^1
the above may be slightly wrong in the format I have not used the '51 for a while, but do remember using the above technique
Erik