We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello community I am migrating a design devolped on a 8bit PIC archecture to an STM32Lx architecture (based on Cortex M0 plus) I did the initial homework b dowloading the MDK, install the required packs (CMSI, which I like so much) and I started a new uVision project (V5.15 latest and greatest) So far the project is empty: I cannot see startup files for the selected MCU (this is a nice featre of Atmel Studio competition ;) ) so I found example projects in the ARM / Keil site: e.g. STM32 timer example http://www.keil.com/download/docs/363.asp. It looks like these projects works for the old fashion microvision (no packs) and for the STM32Fx families (supposedly SW compatible, right). I was asked to migrate to the new uVision version (with packs). So far so good. At this point the project does not compile :(, it cannot find stm32f10x_lib.h, suuposedly in the old installation directory of keil.
In order to start with the right step I am here to ask - one or more example projects for the STM32Lx family which uses CMSIS which is reliable and usable as a starting point - OR a startup file for the STM32Lx together with directions on how to use CMSIS in a Keil uVision CM0+ ARM project
Many thanks to who'll help
You might find more appropriate start up files here www.st.com/.../PF260788